How to Find DHCP Host Allocation

Overview

This article will explain the steps required to view the allocated DHCP host entries in both the Cato Management Application (CMA) and the local Socket WebUI.

Note:

Please be aware that the number of DHCP hosts displayed may differ between the Socket WebUI and the CMA.

Showing DHCP Host in the CMA

To view the allocated DHCP addresses and hosts within the CMA:

1. Verify that a DHCP range is configured for the network range for a site:

   1. From the navigation menu, select Network > Sites, and select the site.

   2. From the navigation menu, select Site Configuration > Networks.

   3. Review the DHCP range configured for the network. The example below shows the range 192.168.43.2 - 192.168.43.50 configured for the Native Range.

      

2. From the navigation menu, click Site Monitoring > Known Hosts.

3. Filter for Hosts in DHCP ranges, the assigned hosts, and their allocated IP addresses are shown.

   

Socket WebUI

It is also possible to view the DHCP entries on the webpage of the Socket WebUI.

1. From the Site Configuration > Socket page for the site, open the Socket WebUI.

2. On the Monitor page, you can see the DHCP Server Entries at the bottom of the page.