--- title: "Setting a Different Port to Connect to the Cato PoP" slug: "setting-a-different-port-to-connect-to-the-cato-pop" tags: ["Sockets"] updated: 2026-07-13T16:59:49Z published: 2026-07-13T16:59:49Z canonical: "knowledge.catonetworks.com/setting-a-different-port-to-connect-to-the-cato-pop" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.catonetworks.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting a Different Port to Connect to the Cato PoP ## Overview Oftentimes, the Socket can sometimes disconnect, because the government requires ISPs to restrict using UDP port **443**. You can configure the Socket instead to use UDP port **1337**. ## Solution Set a different port to establish the tunnel with Cato PoPs. **To change the port for a Socket:** 1. Log in the Socket [WebUI.](/docs/setting-a-different-port-to-connect-to-the-cato-pop#) 2. Browse to the **Cato Connection Settings** tab: | ![Screen_Shot_2021-11-10_at_10.55.30.png](https://cdn.document360.io/81d0367c-2b69-4ba8-b412-1c8f46ce677e/Images/Documentation/24248010633885.png?sv=2026-02-06&spr=https&st=2026-11-15T13%3A22%3A17Z&se=2026-11-15T14%3A22%3A17Z&sr=c&sp=r&sig=6UuHOPZwBqM9rU9PMGTESkIbDzDV48B0mPxHIYmUPM8%3D) | | --- | 3. Under the **DTLS port settings** section, change the port number to 1337 and click **Update**. ![Screen_Shot_2021-11-10_at_10.57.50.png](https://cdn.document360.io/81d0367c-2b69-4ba8-b412-1c8f46ce677e/Images/Documentation/24248052048413.png?sv=2026-02-06&spr=https&st=2026-11-15T13%3A22%3A17Z&se=2026-11-15T14%3A22%3A17Z&sr=c&sp=r&sig=6UuHOPZwBqM9rU9PMGTESkIbDzDV48B0mPxHIYmUPM8%3D) 4. Click **Reconnect** to apply the changes to the Socket. (You can also restart the Socket.) The Socket establishes the DTLS tunnel using the 1337 UDP port. ### Setting a Backup Port Starting with Socket v26.0 and higher, if the Socket has two failed attempts to connect to the PoP, you can specify a backup port number for it to try. - Primary port 443, backup port 1337 - Primary port 1337, backup port 443 > [!TIP] > IMPORTANT! > > Only define a backup port for a Socket after receiving instructions from Cato authorized personnel. ![](https://cdn.document360.io/81d0367c-2b69-4ba8-b412-1c8f46ce677e/Images/Documentation/DTLS_backup.png?sv=2026-02-06&spr=https&st=2026-11-15T13%3A22%3A17Z&se=2026-11-15T14%3A22%3A17Z&sr=c&sp=r&sig=6UuHOPZwBqM9rU9PMGTESkIbDzDV48B0mPxHIYmUPM8%3D) **To set a backup port for the Socket:** 1. Select **Use backup port**. 2. Enter **1337** or **443**. 3. Click **Update**. 4. Click **Reconnect** to apply the changes to the Socket. (You can also restart the Socket.)