--- title: "配置 ESXi 应用连接器" slug: "configuring-an-esxi-app-connector" tags: ["Sites"] updated: 2026-09-02T23:44:45Z published: 2026-09-02T23:44:45Z canonical: "knowledge.catonetworks.com/configuring-an-esxi-app-connector" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.catonetworks.com/llms.txt > Use this file to discover all available pages before exploring further. # 配置 ESXi 应用连接器 本文介绍了如何为运行 VMware ESXi 的数据中心或通用 CPE (uCPE) 部署应用连接器。 ## 准备配置 ESXi 应用连接器 以下是准备创建 VMware ESXi 应用连接器并将其连接到 Cato Cloud 的必备条件: - 从 Cato Networks 存储库下载用于 ESXi vSocket 和应用连接器的 OVA 映像,详见 [Socket 和 vSocket 映像文件](/v1/docs/socket-and-vsocket-image-files) - 应用连接器 VM 上 WAN1 接口的互联网连接 - 应用连接器 VM 上 LAN 接口需具备公共 DNS 服务 - 只为 VM 连接 3 个网络接口 (NICs)。 连接超过 3 个 NIC 可能会导致应用连接器出现问题 ## Create an App Connector When you create an App Connector, you can choose the behavior for connecting to a preferred PoP in the Cato Cloud: - Disabled - the App Connector automatically connects to the best available PoP (default) - Enabled - Select the PoPs to which the connector attempts to connect to When Preferred PoP is enabled, you can restrict an App Connector to only connect to the Preferred PoP Locations that you configure. In this case, the connector doesn't connect to a non-preferred PoP location despite any connectivity or performance issues that it is experiencing. When you use this option, you must define a primary and secondary PoP location for the App Connector. Once the App Connector is created in the CMA, copy the serial number, as you will need to provide it when deploying the App Connector in your cloud environment. ![](https://cdn.document360.io/81d0367c-2b69-4ba8-b412-1c8f46ce677e/Images/Documentation/new app connector.png?sv=2026-02-06&spr=https&st=2026-11-19T06%3A03%3A21Z&se=2026-11-19T07%3A03%3A21Z&sr=b&sp=r&sig=DHkOtBYxc1rhNuYmi8n%2BdqESM%2BfAaUyhuE6aXE%2Bt3eI%3D) **To create an App Connector in the CMA:** 1. From the navigation menu, click **Access > App Connector**, and then click **New**. 2. Enter the information in the **General** section, such as **Connector** **Name** and **Country**. 3. Under **Type**, click **Virtual**. 4. In the **Connector Group** section, select an existing App Connector group from the list or enter a name to create a new group. 5. Under **Preferred PoPs**, select the behavior 1. **Disabled** - the App Connector tries to connect to the best available PoP 2. **Enabled** - Select the **Primary** and **Secondary** PoP locations that the connector tries to connect to 3. **Enabled** and **Only connect to the preferred PoPs** - Only connect to the **Primary** or **Secondary** PoP location 6. Click **Apply**. ## 部署 ESXi 应用连接器的最佳实践 - 部署 ESXi 应用连接器时,建议在 vSphere 中直接使用 OVA 文件创建 VM,而不是先创建 VM 然后再附加 OVA 文件。 直接从 OVA 文件部署可确保正确应用所有必要的硬件设置,并帮助避免潜在的硬件兼容性问题。 如果您已部署并需要添加内存,可以在不重新部署应用连接器的情况下进行添加。 - 确保满足 vSphere 和 VM 资源的 VM 应用连接器最低要求,详见 [下文](/v1/docs/configuring-an-esxi-app-connector#minimum-requirements-for-the-vsocket)。 ## 在 ESXi 中部署 VM 在 vSphere 中,基于 Cato OVA 模板为应用连接器部署一个新的 VM。 ESXi 应用连接器的性能取决于 ESXi 主机的硬件配置。 ### 应用连接器的最低要求 以下是 VM 应用连接器的最低要求: - vSphere要求: - 最低 ESXi 版本 - ESXi 8.0 - 镜像格式 - OVA - 所需VM资源: - 2个vCPU - 4 GB RAM - 至少7 GB硬盘 ### 部署VM 将 ESXi 模板部署到 vSphere 中的 VM,并配置应用连接器接口的设置。 **将应用连接器部署到 VM:** 1. 右键点击 ESXi 主机或文件夹,选择 **部署 OVF 模板**。 2. 在**选择OVF模板窗口**中,选择**本地文件**并点击**选择文件**。 3. 选择包含应用连接器映像的 OVA 文件。 点击 **下一步**. 4. 在 **选择名称和文件夹**窗口中,输入 VM 名称并选择位置。 点击 **下一步**. 5. 在 **选择计算资源**窗口中,为 VM 选择主机。 单击**下一步**。 vSphere验证OVF模板的设置。 6. 在**查看详细信息窗口**中,点击**下一步**。 7. 在**选择存储窗口**中,选择虚拟磁盘。 点击 **下一步**. 8. 在**选择网络窗口**中,根据以下Socket **源网络**配置每个**目标网络**: 1. 局域网接口 2. 管理接口 3. 广域网接口 点击 **下一步**。 9. 在 **自定义模板**窗口中,输入 Cato 管理应用程序中应用连接器的序列号。 需要输入准确的序列号(包括短横线)。 10. 单击**下一步**。 11. 在**准备完成窗口**中,点击**完成**。 vSphere 部署应用连接器 VM。 12. 如有必要,点击**编辑设置**并更改VM的资源和网络。 ##