Note:
Please contact feature-releases@catonetworks.com for more information about enabling and using this feature.
Overview
You can deploy a physical App Connector to provide secure access to private applications in a physical data center or branch environment. The physical App Connector establishes an outbound connection to Cato, and once connected, you assign it in the CMA and associate it with the relevant app connector group.
Unlike a virtual App Connector, a physical App Connector does not require a serial number to be entered during a cloud deployment template. Instead, after the device is connected to the network and communicates with Cato, the CMA detects the new device and prompts you to identify and assign it.
Supported Socket Models
All x1500 Socket models support deploying a physical App Connector
Other Socket models (such as X1600 and X1700) are not currently supported for physical App Connectors
Understanding the Physical App Connector Workflow
The following is a high-level workflow for deploying a physical app connector:
You create the App Connector object in the CMA
Physically connect the device to the network
Assign the device to a connector
Assign apps to the connector
Create a Physical App Connector
To create a physical app connector
In the Access > App Connector page, click New.
Enter the information in the General section, such as name and location.
Under Type, click Physical.
In the Connector Group section, select an existing group from the list or enter a name to create a new group.
Under Preferred PoPs, use the toggle to determine if you want the connector to use the preferred PoPs configured for the account (default), or manually enter the PoPs to which the connector should attempt to connect.
Click Apply.
Connect your Device to the Network
For information about connecting your device to the network, refer to the relevant deployment guides.
Assign the Device to a Connector
Once the device connects to the Cato Cloud, you can assign it to the app connector you created above from the Notifications panel.
To assign a device to a connector
Click the notification icon
.In the Notifications panel, click Activate New Socket.
Under Assign to, click App Connector.
Under Site, select the app connector you created above.
Click Ok.
Assign Apps to the Connector
You assign apps to your connectors either from the Private Apps page or from App Connectors page, using the Assign App link.