تحليل أحداث نقطة الوصول في مراقبة تجربة المستخدم

Prev Next

توضح هذه المقالة كيفية استخدام صفحة تفصيل مراقبة تجربة المستخدم لتحليل أحداث نقطة الوصول.

لمزيد من المعلومات حول مراجعة التحليلات في صفحة مراقبة تجربة المستخدم، راجع فهم صفحات تفصيل مراقبة تجربة المستخدم.

الملخص

يعرض قسم نقطة الوصول في صفحة تفصيل مراقبة تجربة المستخدم أحداث نقطة الوصول اللاسلكية المجمعة من منصات الواي فاي المدمجة لمساعدتك على تحليل مشكلات الاتصال والمصادقة التي تؤثر على تجربة المستخدم في الشبكة اللاسلكية. قم بربط هذه الأحداث مع عقد الشبكة الأخرى للمساعدة في تحديد ما إذا كانت المشكلة بسبب نقطة الوصول أو العناصر الأخرى، مثل ظروف الواي فاي المحلية، اتصال ISP ، الأجهزة، أو مشكلات التطبيق. يتم عرض هذه العقدة عندما يتم الاتصال من خلال نقطة وصول لاسلكية مدمجة مع مراقبة تجربة Cato.

المتطلبات السابقة

تنويه:

عقدة نقطة الوصول متاحة فقط للمستخدمين في المكتب والمضيفين.

DEM_Access_Point_events_table.png

Access Point Events

The Access Point Events table shows events generated by the access point for the selected user or host. This helps you identify incidents that are likely to degrade user experience or interrupt Wi-Fi connectivity, such as client disassociations, authentication failures, and DNS or IP assignment issues.

For each event, the table shows:

  • Event Type – The type of access point event, such as client disassociation, authentication failures, DNS or ARP failures, and IP assignment events

  • Severity – The severity level reported by the access point platform, if available

  • Device – The device name

  • Time – The time the event occurred

  • SSID – Name of the wireless network the user is connected to

  • Access Point – The identifier for the access point that generated the event

When you expand an event, detailed information for the event is shown. The details vary by event type and can include:

  • Time – The exact timestamp of the event

  • Last Association – The last association time for the client

  • Device – The client device type

  • MAC Address – The MAC address of the client device. Click the address to view the access point events in the access point's third-party application. For example, for a Juniper Mist access point, the Juniper Mist application opens and shows the events.

  • SSID – The wireless network name

  • BSSID – The MAC address of the access point

  • Protocol – The wireless protocol in use (for example, IEEE 802.11ax)

  • Band – The wireless band used by the client (for example, 5 GHz)

  • Channel – The wireless channel

  • Security – The security mode used by the SSID (for example, WPA3-SAE-PSK/CCMP)

  • Reason Code – The reason code reported by the access point, when applicable

  • Description – A description of the event or reason code